Deep Clean Solution for absorbent fabrics & suede
Deep-clean absorbent materials in 7 easy steps. Follow the steps directly below — no download needed.

Also suitable for other absorbent materials, such as linen, wool and synthetic fabrics.
Before you begin
First test the product on an inconspicuous area. Always clean the entire surface to prevent color differences after drying.
Step by step
-
1
Remove loose dirt
Remove as much attached dirt as possible before you begin.
-
2
Moisten the brush
Moisten a clean brush with lukewarm water.
-
3
Spray
Apply a few sprays to the surface you want to clean.
-
4
Scrub until it foams
Scrub with the damp brush until a rich foam forms.
-
5
Wipe dry
Wipe the surface dry with a clean cloth.
-
6
Repeat if necessary
OptioneelNot clean enough yet? Then repeat steps 2 to 5.
-
7
Allow 24 hours for drying
24 hoursAllow the material to dry for at least 24 hours at room temperature. During that time, the product stays active deep in the fibres.
Cleaning removes the protective layer. Afterwards, treat the material with Piggy Proof® Premium Protector 01 to prevent new stains.