Premium Protector for absorbent fabrics & suede

Protect absorbent materials from moisture, dirt, and stains in 7 easy steps. Follow the steps directly below — no download needed.

7 stappen 24 hours drying Meertalige PDF

Geschikt voor

SuedeNubuckMeshCanvasCottonLinen

Also suitable for other absorbent materials.

Before you begin

Shake the bottle well and first test the product on an inconspicuous area. Are you treating your material with multiple colors? Then start with the lightest color and use a clean brush for each color.

Step by step

1

Clean and dry
Ensure the entire surface is clean and completely dry before you begin.
2

Uniform injection
10–15 cm
Spray the entire surface evenly from 10–15 cm away until damp. Avoid drips and ensure the material is not soaked.
3

Brush in carefully
Gently brush the product into the fibres with a clean, soft brush to ensure deep adhesion. Skip this step for very delicate or fragile materials.
4

Repeat treatment
After 10 min
Wait 10 minutes and then repeat step 2 and step 3 once.
5

Remove excess product
After 10 min
Wait another 10 minutes. Blot away any product that has not soaked in with a clean, absorbent cloth. The material should be treated evenly, with no visible drips. Also, thoroughly dry rubber and metal parts.
6

Allow 24 hours for drying
24 hours
Allow the treated material to dry for at least 24 hours at room temperature. Do not use or wear the product until after this drying time.
7

Roughen up suede and nubuck
Optioneel
If necessary, gently brush dried suede or nubuck with a clean brush. This will restore the natural look and texture of the material.